.png){kind=logo}
Dimensional constraint
The complete vehicle had to remain within 12 meters while keeping the platform height at no more than 1100 mm.
REAL PROJECT · PHOTO REPORT
Low-deck dropside truck with three-section vehicle-recovery platform
A project with strict dimensional and engineering constraints: overall length not more than 12 m, an 8-ton hydraulic truck-mounted crane, a non-driven auxiliary axle rated for up to 10 t, removable aluminium drop sides and a platform height limit of 1100 mm.
Overall length≤ 12 m
Working-platform height1070 mm
Crane8 t hydraulic truck-mounted crane
Non-driven auxiliary axlerated up to 10 t
Drop sidesRemovable aluminium
WHY HENGVO MATTERS
The dimensional limits and the non-standard drop-side solution were achieved.
Truck-mounted crane and auxiliary axle
The configuration included an 8-ton hydraulic truck-mounted crane and a non-driven auxiliary axle rated for up to 10 t while preserving the required overall vehicle geometry.
Removable aluminium drop sides
The key engineering challenge was integrating removable aluminium drop sides with the three-section vehicle-recovery platform. We had not previously fitted drop sides to this type of platform in our projects, so the mounting concept and installation sequence had to be engineered separately.
Result
The actual working-platform height was 1070 mm, below the 1100 mm limit. All other specified technical parameters were achieved and the technical assignment was completed.
PHOTO REPORT
The real vehicle, not a promise
ENGINEERING SOLUTION
Installation of the removable aluminium drop sides
The video shows the installation of removable aluminium drop sides on the low-deck three-section vehicle-recovery platform — one of the key engineering tasks of this project.
Drop-side installationNon-standard engineering solution for a low-deck vehicle-recovery platform
HENGVO · CONFIDENCE. ENGINEERED. DELIVERED.
Complex vehicles need disciplined control.
Send us the task even if the specification is not complete yet. We can help shape a workable configuration and control the project in China through the pre-shipment stage.
Discuss a custom project →